Brick Cladding replacements

Face Brick Cladding replacements made from Fiberglass. Glue on using a Contact Cement or Liquid Nails or fabric glue. Cut to size using a hack saw or fine power blade. Two types available. Other colours can be produced to order / sample, however exact colour match cannot be guaranteed due to ageing of the originals which was made out of plaster and normally collect dirt. Natural can be painted to suit your colour.

Colour	Type	Size	Cost
Natural	Rendered	216 x 77 mm	$5.00 ea
Off-White	Rendered	216 x 77 mm	$10.00 ea
As Sample	Rendered	216 x 77 mm	$10.00 ea	Min order 10


Off White	House with Brick Cladding

The originals where applied using a splatter gun and a stencil. However as they are only plaster they are brittle and they tend to fall off with time especially those exposed to the elements. They also shatter when they hit the ground. Loose ones can be removed with a heat gun and glued back on. Use care as they break easily. The Resin replacements are not as brittle as the plaster type however being very thin they may break if dropped on a hard surface or if handled rough, however they can be glued together with Super Glue.